Name | Type | Description |
Permeability |
P_SINGLEVALUE
/
IfcNormalisedRatioMeasure
|
| Durchl盲ssigkeit | Durchl盲ssigkeit der Unterdecke als Faktor zwischen 0 Undurchl盲ssig und 1 v枚llig durchl盲ssig. Der Faktor kann zur Absch盲tzung genutzt werden, ob die Unterdecke zur Decke hin offen und durchl盲ssig (f眉r Licht, Wasser und Sicht) ist. |
| Permeability | Ratio of the permeability of the ceiling.
The ration can be used to indicate an open ceiling (that enables identification of whether ceiling construction should be considered as impeding distribution of sprinkler water, light etc. from installations within the ceiling area). |
| Perm茅abilit茅 | Ratio de perm茅abilit茅 du plafond. Ce ratio peut 锚tre utilis茅 pour d茅signer un plafond ouvert (cela permet de savoir si la pose du plafond emp锚che la distribution de fluides 脿 partir d'installations situ茅es dans le faux plafond). |
| 娓楅忕巼 | 澶╄姳鏉跨殑娓楅忔瘮鐜囥
璇ユ瘮鐜囧彲鐢ㄤ互琛ㄧず寮鏁炲紡澶╄姳鏉匡紙琛ㄧず澶╄姳鏉胯兘鍚﹂樆闅斿叾鍐呬晶鐨勫柗娣嬫按銆佸厜绾跨瓑鐨勶級銆 |
|
TileLength |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Deckenplattenl盲nge | L盲nge der Unterdeckenplatten, oder -panele, die zur Verkleidung verwendet werden. |
| Tile Length | Length of ceiling tiles. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence. |
| Longueur des carreaux | Longueur des carreaux de plafond. Cette propri茅t茅 est donn茅e en compl茅ment de la repr茅sentation de la forme et des param猫tres g茅om茅triques qui la d茅terminent. En cas d'incoh茅rence entre ces param猫tres g茅om茅triques et cette propri茅t茅, ce sont les param猫tres g茅om茅triques qui priment. |
| 闈㈢爾闀垮害 | 澶╄姳鏉块潰鐮栫殑闀垮害銆
璇ュ睘鎬ф墍鎻愪緵鐨勫昂瀵镐俊鎭槸瀵瑰唴閮ㄥ舰鐘舵弿杩板拰鍑犱綍鍙傛暟鐨勮ˉ鍏呫傚鏋滃嚑浣曞弬鏁颁笌璇ュ睘鎬ф墍鎻愪緵鐨勫昂瀵稿睘鎬т笉绗︼紝搴斾互鍑犱綍鍙傛暟涓哄噯銆 |
|
TileWidth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Deckenplattenbreite | Breite der Unterdeckenplatten, oder -panele, die zur Verkleidung verwendet werden. |
| Tile Width | Width of ceiling tiles. The size information is provided in addition to the shape representation and the geometric parameters used within. In cases of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence. |
| Largeur des carreaux | Largeur des carreaux de plafond. Cette propri茅t茅 est donn茅e en compl茅ment de la repr茅sentation de la forme et des param猫tres g茅om茅triques qui la d茅terminent. En cas d'incoh茅rence entre ces param猫tres g茅om茅triques et cette propri茅t茅, ce sont les param猫tres g茅om茅triques qui priment. |
| 闈㈢爾瀹藉害 | 澶╄姳鏉块潰鐮栫殑瀹藉害銆
璇ュ睘鎬ф墍鎻愪緵鐨勫昂瀵镐俊鎭槸瀵瑰唴閮ㄥ舰鐘舵弿杩板拰鍑犱綍鍙傛暟鐨勮ˉ鍏呫傚鏋滃嚑浣曞弬鏁颁笌璇ュ睘鎬ф墍鎻愪緵鐨勫昂瀵稿睘鎬т笉绗︼紝搴斾互鍑犱綍鍙傛暟涓哄噯銆 |
|