7.5.4.55 Pset_FilterTypeCommon

PSET_TYPEDRIVENOVERRIDE / IfcFilter

Natural language names

Filter Type Common

Properties

buildingSMART Data Dictionary

PSD-XML

Name	Type	Description
Reference	P_SINGLEVALUE / IfcIdentifier *	Bauteiltyp Bezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterstützt. Reference Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types. Reference Référence à l'identifiant d'un type spécifié dans le contexte du projet (exemple : "type A1") pour désigner un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas gérés par le logiciel. 参照記号 このプロジェクトにおける参照記号(例：A-1)。分類コードではなく内部で使用されるプロジェクトタイプとして使用されるもの。 参考号 若未采用已知的分类系统，则该属性为该项目中该类型构件的参考编号（例如，类型A-1）。
Status	P_ENUMERATEDVALUE / IfcLabel / PEnum_ElementStatus*	Status Status bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Ergänzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Temporär" (temporary) Bauteil und andere Bauelemente, die vorübergehend eingebaut werden (wie Abstützungen, etc.) Status Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). Statut Statut de l'élément, principalement utilisé dans les projets de rénovation et de réhabilitation. Le statut a pour valeur NOUVEAU pour un nouvel élément, EXISTANT pour un élément existant qui est conservé, DEMOLI pour un élément existant à démolir et TEMPORAIRE pour un élément temporaire (comme une structure support provisoire). 状態 要素（主にリノベーションまたは改修プロジェクトにおいて）の状態。 状態は、「新規(New)」－新しく追加される要素。「既存」－要素は存在し、かつ残りもの。「破壊」－要素は存在したが、廃棄されるもの。「一時的」－一時的に存在する要素（一時的にサポートしている構造のようなもの）。
Weight	P_SINGLEVALUE / IfcMassMeasure	Weight Weight of filter.
InitialResistance	P_SINGLEVALUE / IfcPressureMeasure	Initial Resistance Initial new filter fluid resistance (i.e., pressure drop at the maximum air flowrate across the filter when the filter is new per ASHRAE Standard 52.1).
FinalResistance	P_SINGLEVALUE / IfcPressureMeasure	Final Resistance Filter fluid resistance when replacement is required (i.e., Pressure drop at the maximum air flowrate across the filter when the filter needs replacement per ASHRAE Standard 52.1).
OperationTemperatureRange	P_BOUNDEDVALUE / IfcThermodynamicTemperatureMeasure	Operation Temperature Range Allowable operation ambient fluid temperature range.
FlowRateRange	P_BOUNDEDVALUE / IfcVolumetricFlowRateMeasure	Flow Rate Range Possible range of fluid flowrate that can be delivered.
NominalFilterFaceVelocity	P_SINGLEVALUE / IfcLinearVelocityMeasure	Nominal Filter Face Velocity Filter face velocity.
NominalMediaSurfaceVelocity	P_SINGLEVALUE / IfcLinearVelocityMeasure	Nominal Media Surface Velocity Average fluid velocity at the media surface.
NominalPressureDrop	P_SINGLEVALUE / IfcPressureMeasure	Nominal Pressure Drop Total pressure drop across the filter.
NominalFlowrate	P_SINGLEVALUE / IfcVolumetricFlowRateMeasure	Nominal Flowrate Nominal fluid flow rate through the filter.
NominalParticleGeometricMeanDiameter	P_SINGLEVALUE / IfcPositiveLengthMeasure	Nominal Particle Geometric Mean Diameter Particle geometric mean diameter associated with nominal efficiency.
NominalParticleGeometricStandardDeviation	P_SINGLEVALUE / IfcReal	Nominal Particle Geometric Standard Deviation Particle geometric standard deviation associated with nominal efficiency.

  Link to this page