| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
* |
 | Bauteiltyp | Bezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterst眉tzt. |
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types. |
 | Reference | R茅f茅rence 脿 l'identifiant d'un type sp茅cifi茅 dans le contexte du projet (exemple : "type A1") pour d茅signer un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas g茅r茅s par le logiciel. |
 | 鍙傜収瑷樺彿 | 銇撱伄銉椼儹銈搞偋銈儓銇亰銇戙倠鍙傜収瑷樺彿(渚嬶細A-1)銆傚垎椤炪偝銉笺儔銇с伅銇亸鍐呴儴銇т娇鐢ㄣ仌銈屻倠銉椼儹銈搞偋銈儓銈裤偆銉椼仺銇椼仸浣跨敤銇曘倢銈嬨倐銇 |
 | 鍙傝冨彿 | 鑻ユ湭閲囩敤宸茬煡鐨勫垎绫荤郴缁燂紝鍒欒灞炴т负璇ラ」鐩腑璇ョ被鍨嬫瀯浠剁殑鍙傝冪紪鍙凤紙渚嬪锛岀被鍨婣-1锛夈 |
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus* |
| Status | Status bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Erg盲nzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Tempor盲r" (temporary) Bauteil und andere Bauelemente, die vor眉bergehend eingebaut werden (wie Abst眉tzungen, etc.) |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
| Statut | Statut de l'茅l茅ment, principalement utilis茅 dans les projets de r茅novation et de r茅habilitation. Le statut a pour valeur NOUVEAU pour un nouvel 茅l茅ment, EXISTANT pour un 茅l茅ment existant qui est conserv茅, DEMOLI pour un 茅l茅ment existant 脿 d茅molir et TEMPORAIRE pour un 茅l茅ment temporaire (comme une structure support provisoire). |
| 鐘舵厠 | 瑕佺礌锛堜富銇儶銉庛儥銉笺偡銉с兂銇俱仧銇敼淇儣銉偢銈с偗銉堛伀銇娿亜銇︼級銇姸鎱嬨 鐘舵厠銇併屾柊瑕(New)銆嶏紞鏂般仐銇忚拷鍔犮仌銈屻倠瑕佺礌銆傘屾棦瀛樸嶏紞瑕佺礌銇瓨鍦ㄣ仐銆併亱銇ゆ畫銈娿倐銇傘岀牬澹娿嶏紞瑕佺礌銇瓨鍦ㄣ仐銇熴亴銆佸粌妫勩仌銈屻倠銈傘伄銆傘屼竴鏅傜殑銆嶏紞涓鏅傜殑銇瓨鍦ㄣ仚銈嬭绱狅紙涓鏅傜殑銇偟銉濄兗銉堛仐銇︺亜銈嬫閫犮伄銈堛亞銇倐銇級銆 |
|
| PlacementType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SpaceHeaterPlacementType |
| Placement Type | Indicates how the space heater is designed to be placed. |
| 銉椼儸銉笺偣銉°兂銉堛偪銈ゃ儣 | 鏆栨埧鐢ㄣ儝銉笺偪銉笺亴缃亱銈屻倠銈堛亞銇仼銇嗚ō瑷堛仌銈屻仸銇勩倠銇嬨倰绀恒仐銇俱仚銆 |
|
| TemperatureClassification |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SpaceHeaterTemperatureClassification |
| Temperature Classification | Enumeration defining the temperature classification of the space heater surface temperature.
low temperature - surface temperature is relatively low, usually heated by hot water or electricity.
high temperature - surface temperature is relatively high, usually heated by gas or steam. |
| 娓╁害鍒嗛 | 鏆栨埧鐢ㄣ儝銉笺偪銉艰〃闈㈡俯搴︺伄娓╁害鍒嗛銈掑畾缇┿備綆娓┿偪銈ゃ儣-銇婃汞銇俱仧锝堥浕姘椼伀銈堛倠銈傘伄銇〃闈㈡俯搴︺伅鐩稿鐨勩伀浣庛亜銆傞珮娓┿偪銈ゃ儣-銈偣銇俱仧銇捀姘椼伀銈堛仯銇︾啽銇欍倠銈裤偆銉椼伄琛ㄩ潰娓╁害銇瘮杓冪殑楂樸亜銆 |
|
| HeatTransferDimension |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SpaceHeaterHeatTransferDimension |
| Heat Transfer Dimension | Indicates how heat is transmitted according to the shape of the space heater. |
| 鐔变紳閬斿 | 瀹ゅ唴鏆栨埧姗熴伄褰€伀寰撱仯銇︾啽銇屻仼銇嗕紳銇堛倝銈屻倠銇嬨倰绀恒仐銇俱仚銆 |
|
| HeatTransferMedium |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_HeatTransferMedium |
| Heat Transfer Medium | Enumeration defining the heat transfer medium if applicable. |
| 鐔卞獟浣 | 鍒楁寵浣撱伅鐔卞獟浣撱倰蹇呰銇繙銇樸仸瀹氱京銇椼伨銇欍 |
|
| EnergySource |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_EnergySource |
| Energy Source | Enumeration defining the energy source or fuel combusted to generate heat if applicable. Note: hydronic heaters shall use UNSET; dual-use hydronic/electric heaters shall use ELECTRICITY. |
| 銈ㄣ儘銉偖銉兼簮 | 鍒楁寵鍨嬨伅銈ㄣ儘銉偖銉兼簮銈勭噧鏂欒┎褰撱仚銈嬪牬鍚堛伅鐔便倰鐧虹敓銇曘仜銈嬬噧鐒煎畾缇┿仐銇俱仚銆傛敞锛氭俯姘村惊鐠板紡銇儝銉笺偪銉笺伅unset銈掍娇鐢ㄣ仐銇︺伅銇倝銇亜銆傘儑銉ャ偄銉娇鐢ㄣ仚銈嬨仺銆佹俯姘村惊鐠板紡銇浕姘椼儝銉笺偪銉笺伅闆绘皸銈掍娇鐢ㄣ仐銇亼銈屻伆銇倝銇亜銆 |
|
| BodyMass |
P_SINGLEVALUE
/
IfcMassMeasure
|
| Body Mass | Overall body mass of the heater. |
| 鏈綋閲嶉噺 | 銉掋兗銈裤兗銇叏浣撶殑銇唱閲 |
|
| ThermalMassHeatCapacity |
P_SINGLEVALUE
/
IfcReal
|
| Thermal Mass Heat Capacity | Product of component mass and specific heat. |
| 淇濇湁鐔卞閲 | 璩噺銇傘仧銈娿伄鐔卞閲 |
|
| OutputCapacity |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Output Capacity | Total nominal heat output as listed by the manufacturer. |
| 鍑哄姏 | 銉°兗銈兗銇倛銈娿儶銈广儓銈€儍銉椼仌銈屻仧鍏О鐔卞嚭鍔 |
|
| ThermalEfficiency |
P_SINGLEVALUE
/
IfcNormalisedRatioMeasure
|
| Thermal Efficiency | Overall Thermal Efficiency is defined as gross energy output of the heat transfer device divided by the energy input. |
| 鐔卞姽鐜 | 鐔卞姽鐜囷細鐔变紳灏庤缃伄绶忋偍銉嶃儷銈兗鍑哄姏/銈ㄣ儘銉偖銉煎叆鍔涖仺銇椼仸绶忓悎鐨勩仾鐔卞姽鐜囥伅瀹氱京銇曘倢銈嬨 |
|
| NumberOfPanels |
P_SINGLEVALUE
/
IfcInteger
|
| Number Of Panels | Number of panels. |
| 銉戙儘銉伄鏁 | 銉戙儘銉伄鏁 |
|
| NumberOfSections |
P_SINGLEVALUE
/
IfcInteger
|
| Number Of Sections | Number of vertical sections, measured in the direction of flow. |
| 銈汇偗銈枫儳銉炽伄鏁 | 娴併倢鏂瑰悜銇ф脯瀹氥仐銇熷瀭鐩存柟鍚戙伄銈汇偗銈枫儳銉炽伄鏁 |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page