Name | Type | Description |
CoolingDesignAirflow |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
| Cooling Design Airflow | The air flowrate required during the peak cooling conditions. |
| 鍐锋埧瑷▓鍚告皸閲 | 銉斻兗銈檪銇喎鎴挎潯浠躲仹瑕佹眰銇曘倢銈嬬郸姘楅噺銆 |
|
HeatingDesignAirflow |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
| Heating Design Airflow | The air flowrate required during the peak heating conditions, but could also be determined by minimum ventilation requirement or minimum air change requirements. |
|
TotalSensibleHeatGain |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Total Sensible Heat Gain | The total sensible heat or energy gained by the space during the peak cooling conditions. |
| 椤曠啽璨犺嵎銇悎瑷 | 銉斻兗銈檪銇喎鎴挎潯浠躲仹鍙栧緱銇椼仧椤曠啽鎴栥亜銇偍銉嶃儷銈兗銆 |
|
TotalHeatGain |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Total Heat Gain | The total amount of heat or energy gained by the space at the time of the space's peak cooling conditions. |
| 鐔卞彇寰椼伄鍚堣▓ | 銉斻兗銈檪銇鍐呮渶澶у喎鎴胯矤鑽锋檪銇彇寰椼仐銇熼鐔辨垨銇勩伅銈ㄣ儘銉偖銉笺 |
|
TotalHeatLoss |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Total Heat Loss | The total amount of heat or energy lost by the space at the time of the space's peak heating conditions. |
| 鐔便儹銈广伄鍚堣▓ | 銉斻兗銈檪銇鍐呮渶澶ф殩鎴胯矤鑽锋檪銇彇寰椼兓鎼嶅け銇椼仧鐔辨垨銇勩伅銈ㄣ儘銉偖銉笺 |
|
CoolingDryBulb |
P_SINGLEVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Cooling Dry Bulb | Inside dry bulb temperature for cooling design. |
| 鍐锋埧瑷▓娓╁害 | 鍐锋埧瑷▓銇亰銇戙倠瀹ゅ唴瑷▓涔剧悆娓╁害銆 |
|
CoolingRelativeHumidity |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Cooling Relative Humidity | Inside relative humidity for cooling design. |
| 鍐锋埧瑷▓鐩稿婀垮害 | 鍐锋埧瑷▓銇亰銇戙倠瀹ゅ唴瑷▓鐩稿婀垮害銆 |
|
HeatingDryBulb |
P_SINGLEVALUE
/
IfcThermodynamicTemperatureMeasure
|
| Heating Dry Bulb | Inside dry bulb temperature for heating design. |
| 鏆栨埧瑷▓娓╁害 | 鏆栨埧瑷▓銇亰銇戙倠瀹ゅ唴瑷▓涔剧悆娓╁害銆 |
|
HeatingRelativeHumidity |
P_SINGLEVALUE
/
IfcPositiveRatioMeasure
|
| Heating Relative Humidity | Inside relative humidity for heating design. |
| 鏆栨埧瑷▓鐩稿婀垮害 | 鏆栨埧瑷▓銇亰銇戙倠瀹ゅ唴瑷▓鐩稿婀垮害銆 |
|
VentilationAirFlowrate |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
| Ventilation Air Flowrate | Ventilation outside air requirement for the space. |
| 澶栨皸閲 | 蹇呰澶栨皸閲忋 |
|
ExhaustAirFlowrate |
P_SINGLEVALUE
/
IfcVolumetricFlowRateMeasure
|
| Exhaust Air Flowrate | Design exhaust air flow rate for the space. |
| 鎺掓皸閲 | 瑷▓鎺掓皸閲忋 |
|
CeilingRAPlenum |
P_SINGLEVALUE
/
IfcBoolean
|
| Ceiling RAPlenum | Ceiling plenum used for return air or not. TRUE = Yes, FALSE = No. |
| 澶╀簳瑁忛倓姘 | 澶╀簳瑁忛倓姘楋紙銉偪銉炽亗銈娿兓銇仐锛夈TRUE=銇傘倞銆丗ALSE=銇仐銆 |
|
BoundaryAreaHeatLoss |
P_SINGLEVALUE
/
IfcHeatFluxDensityMeasure
|
| Boundary Area Heat Loss | Heat loss per unit area for the boundary object. This is a design input value for use in the absence of calculated load data. |
| 鍛ㄨ竞闁㈤hō鍌欍伄鐔便儹銈 | 鍗樹綅闈㈢⿳銇傘倞銇熷懆杈洪枹閫hō鍌欍伄鐔便儹銈广傜┖瑾胯矤鑽疯▓绠楀や互澶栥伄瑷▓瑷畾鍊ゃ |
|