| Name | Type | Description |
|---|
| PatternType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_TankPatternType |
 | Pattern Type | Defines the types of pattern (or shape of a tank that may be specified. |
 | 銉戙偪銉笺兂銈裤偆銉 | 瀹氱京銆銉戙偪銉笺兂銇偪銈ゃ儣锛堝張銇偪銉炽偗銇舰鐘讹級銇屾槑绀恒仌銈屻倠銆 |
|
| EndShapeType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_EndShapeType |
| End Shape Type | Defines the types of end shapes that can be used for preformed tanks. The convention for reading these enumerated values is that for a vertical cylinder, the first value is the base and the second is the top; for a horizontal cylinder, the order of reading should be left to right. For a speherical tank, the value UNSET should be used. |
| 鏈褰㈢姸銈裤偆銉 | 瀹氱京銆浜堛倎銈裤兂銈伀浣跨敤銇欍倠銇撱仺銇屻仹銇嶃倠绔舰鐘躲伄绋銈掔ず銇欍傘亾銈屻倝銇垪鎸欍仌銈屻仧鍊ゃ倰瑾伩鍙栥倠銇熴倎銇鍓囥伅銆佸瀭鐩村唵绛掋伀闁€仐銇︺伅銆佹渶鍒濄伄鍊ゃ伅銉欍兗銈广仹銇欍併仢銇椼仸銆2鐣洰銇厛绔仹銇欍傛按骞冲唵绛掋伀闁€仐銇︺伅銆佸ゃ伅宸︺亱銈夊彸銇銈蹇呰銇屻亗銈娿伨銇欍傜悆褰€偪銉炽偗銇牬鍚堛佸ゃ伅UNSET銈掍娇鐢ㄣ仚銈嬪繀瑕併亴銇傘倞銇俱仚銆 |
|
| FirstCurvatureRadius |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| First Curvature Radius | FirstCurvatureRadius should be defined as the base or left side radius of curvature value. |
| 鏈鍒濄伄鏇茬巼鍗婂緞 | 鏈鍒濄伄鏇茬巼鍗婂緞銇佸熀鏈張銇洸鐜囥伄鍊ゃ伄宸﹀伌銇崐寰勩仺銇椼仸瀹氱京銇欍倠蹇呰銇屻亗銈娿伨銇欍 |
|
| SecondCurvatureRadius |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Second Curvature Radius | SecondCurvatureRadius should be defined as the top or right side radius of curvature value. |
| 2鐣洰銇洸鐜囧崐寰 | 2鐣洰銇洸鐜囧崐寰勩伅銆佹洸鐜囥伄鍊ゃ伄鍏堥牠鍙堛伅鍙冲伌銇崐寰勩仺銇椼仸瀹氱京銇欍倠蹇呰銇屻亗銈娿伨銇欍 |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page