| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
* |
 | Bauteiltyp | Bezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterst眉tzt. |
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types. |
 | Reference | R茅f茅rence 脿 l'identifiant d'un type sp茅cifi茅 dans le contexte du projet (exemple : "type A1") pour d茅signer un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas g茅r茅s par le logiciel. |
 | 鍙傜収瑷樺彿 | 銇撱伄銉椼儹銈搞偋銈儓銇亰銇戙倠鍙傜収瑷樺彿(渚嬶細A-1)銆傚垎椤炪偝銉笺儔銇с伅銇亸鍐呴儴銇т娇鐢ㄣ仌銈屻倠銉椼儹銈搞偋銈儓銈裤偆銉椼仺銇椼仸浣跨敤銇曘倢銈嬨倐銇 |
 | 鍙傝冨彿 | 鑻ユ湭閲囩敤宸茬煡鐨勫垎绫荤郴缁燂紝鍒欒灞炴т负璇ラ」鐩腑璇ョ被鍨嬫瀯浠剁殑鍙傝冪紪鍙凤紙渚嬪锛岀被鍨婣-1锛夈 |
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus* |
| Status | Status bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Erg盲nzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Tempor盲r" (temporary) Bauteil und andere Bauelemente, die vor眉bergehend eingebaut werden (wie Abst眉tzungen, etc.) |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
| Statut | Statut de l'茅l茅ment, principalement utilis茅 dans les projets de r茅novation et de r茅habilitation. Le statut a pour valeur NOUVEAU pour un nouvel 茅l茅ment, EXISTANT pour un 茅l茅ment existant qui est conserv茅, DEMOLI pour un 茅l茅ment existant 脿 d茅molir et TEMPORAIRE pour un 茅l茅ment temporaire (comme une structure support provisoire). |
| 鐘舵厠 | 瑕佺礌锛堜富銇儶銉庛儥銉笺偡銉с兂銇俱仧銇敼淇儣銉偢銈с偗銉堛伀銇娿亜銇︼級銇姸鎱嬨 鐘舵厠銇併屾柊瑕(New)銆嶏紞鏂般仐銇忚拷鍔犮仌銈屻倠瑕佺礌銆傘屾棦瀛樸嶏紞瑕佺礌銇瓨鍦ㄣ仐銆併亱銇ゆ畫銈娿倐銇傘岀牬澹娿嶏紞瑕佺礌銇瓨鍦ㄣ仐銇熴亴銆佸粌妫勩仌銈屻倠銈傘伄銆傘屼竴鏅傜殑銆嶏紞涓鏅傜殑銇瓨鍦ㄣ仚銈嬭绱狅紙涓鏅傜殑銇偟銉濄兗銉堛仐銇︺亜銈嬫閫犮伄銈堛亞銇倐銇級銆 |
|
| PrimaryVoltage |
P_SINGLEVALUE
/
IfcElectricVoltageMeasure
|
| Primary Voltage | The voltage that is going to be transformed and that runs into the transformer on the primary side. |
| 绗1闆诲湩 | 澶夊湩鍣ㄣ伄1娆″伌銇紳閫併仌銈屻倠闆诲湩銆 |
|
| SecondaryVoltage |
P_SINGLEVALUE
/
IfcElectricVoltageMeasure
|
| Secondary Voltage | The voltage that has been transformed and is running out of the transformer on the secondary side. |
| 绗2闆诲湩 | 澶夊湩鍣ㄣ伄2娆″伌銇稿嚭鍔涖仌銈屻倠闆诲湩銆 |
|
| PrimaryCurrent |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Primary Current | The current that is going to be transformed and that runs into the transformer on the primary side. |
| 绗1闆绘祦 | 澶夊湩鍣ㄣ伄1娆″伌銇紳閫併仌銈屻倠闆绘祦銆 |
|
| SecondaryCurrent |
P_SINGLEVALUE
/
IfcElectricCurrentMeasure
|
| Secondary Current | The current that has been transformed and is running out of the transformer on the secondary side. |
| 绗2闆绘祦 | 澶夊湩鍣ㄣ伄2娆″伌銇稿嚭鍔涖仌銈屻倠闆绘祦銆 |
|
| PrimaryFrequency |
P_SINGLEVALUE
/
IfcFrequencyMeasure
|
| Primary Frequency | The frequency that is going to be transformed and that runs into the transformer on the primary side. |
| 绗紤鍛ㄦ尝鏁 | 澶夊湩鍣ㄣ伄1娆″伌銇紳閫併仌銈屻倠鍛ㄦ尝鏁般 |
|
| SecondaryFrequency |
P_SINGLEVALUE
/
IfcFrequencyMeasure
|
| Secondary Frequency | The frequency that has been transformed and is running out of the transformer on the secondary side. |
| 绗2鍛ㄦ尝鏁 | 澶夊湩鍣ㄣ伄2娆″伌銇嚭鍔涖仌銈屻倠鍛ㄦ尝鏁般 |
|
| PrimaryApparentPower |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Primary Apparent Power | The power in VA (volt ampere) that has been transformed and that runs into the transformer on the primary side. |
| 绗1闆诲姏 | 澶夊湩鍣ㄣ伄1娆″伌銇紳閫併仌銈屻倠闆诲姏锛圴A: 銈€兂銉氥偄锛夈 |
|
| SecondaryApparentPower |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Secondary Apparent Power | The power in VA (volt ampere) that has been transformed and is running out of the transformer on the secondary side. |
| 绗2闆诲姏 | 澶夊湩鍣ㄣ伄2娆″伌銇稿嚭鍔涖仌銈屻倠闆诲姏锛圴A: 銈€兂銉氥偄锛夈 |
|
| MaximumApparentPower |
P_SINGLEVALUE
/
IfcPowerMeasure
|
| Maximum Apparent Power | Maximum apparent power/capacity in VA (volt ampere). |
| 鏈澶ч浕鍔 | 鐨浉闆诲姏/瀹归噺 銇渶澶уゃ锛圴A:銈€兂銉氥偄锛夈 |
|
| SecondaryCurrentType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SecondaryCurrentType |
| Secondary Current Type | A list of the secondary current types that can result from transformer output. |
| 绗2闆绘祦銈裤偆銉 | 澶夊湩鍣ㄣ倛銈婂嚭鍔涖仌銈屻倠绗2闆绘祦銇ó椤炪伄涓瑕с |
|
| ShortCircuitVoltage |
P_SINGLEVALUE
/
IfcComplexNumber
|
| Short Circuit Voltage | A complex number that specifies the real and imaginary parts of the short-circuit voltage at rated current of a transformer given in %. |
| 鐭怠闆诲湩 | %銇т笌銇堛倝銈屻倠澶夊湩鍣ㄣ伄瀹氭牸闆绘祦銇亰銇戙倠鐭怠闆诲湩銇疅鏁般仺铏氭暟銈掑畾缇┿仚銈嬭绱犳暟銆 |
|
| RealImpedanceRatio |
P_SINGLEVALUE
/
IfcRatioMeasure
|
| Real Impedance Ratio | The ratio between the real part of the zero sequence impedance and the real part of the positive impedance (i.e. real part of the short-circuit voltage) of the transformer.
Used for three-phase transformer which includes a N-conductor. |
| 銈ゃ兂銉斻兗銉銉炽偣瀹熼儴姣旂巼 | 闆剁浉銈ゃ兂銉斻兗銉銉炽偣銇ㄦ鐩搞偆銉炽償銉笺儉銉炽偣锛堜緥锛庣煭绲￠浕鍦с伄瀹熼儴锛夈伄闁撱伄姣旂巼銆侼-銈炽兂銉銈偪銉笺倰鍚個涓夌浉銉堛儵銉炽偣銇仧銈併伀浣跨敤銆 |
|
| ImaginaryImpedanceRatio |
P_SINGLEVALUE
/
IfcRatioMeasure
|
| Imaginary Impedance Ratio | The ratio between the imaginary part of the zero sequence impedance and the imaginary part of the positive impedance (i.e. imaginary part of the short-circuit voltage) of the transformer.
Used for three-phase transformer which includes a N-conductor. |
| 銈ゃ兂銉斻兗銉銉炽偣铏氶儴姣旂巼 | 闆剁浉銈ゃ兂銉斻兗銉銉炽偣銇ㄦ鐩搞偆銉炽償銉笺儉銉炽偣锛堜緥锛庣煭绲￠浕鍦с伄铏氶儴锛夈伄闁撱伄姣旂巼銆侼-銈炽兂銉銈偪銉笺倰鍚個涓夌浉銉堛儵銉炽偣銇仧銈併伀浣跨敤銆 |
|
| TransformerVectorGroup |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_TransformerVectorGroup |
| Transformer Vector Group | List of the possible vector groups for the transformer from which that required may be set. Values in the enumeration list follow a standard international code where the first letter describes how the primary windings are connected,
the second letter describes how the secondary windings are connected, and the numbers describe the rotation of voltages and currents from the primary to the secondary side in multiples of 30 degrees.
D: means that the windings are delta-connected.
Y: means that the windings are star-connected.
Z: means that the windings are zig-zag connected (a special start-connected providing low reactance of the transformer);
The connectivity is only relevant for three-phase transformers. |
|
| IsNeutralPrimaryTerminalAvailable |
P_SINGLEVALUE
/
IfcBoolean
|
| Is Neutral Primary Terminal Available | An indication of whether the neutral point of the primary winding is available as a terminal (=TRUE) or not (= FALSE). |
| 涓х偣绗1銈裤兗銉熴儕銉亴銇傘倠銇嬨仼銇嗐亱 | 涓娆″坊绶氥伄涓х偣銇屻偪銉笺儫銉娿儷銇牬鍚堛伅锛=TRUE锛夈侀仌銇嗗牬鍚堛伅锛= FALSE锛夈仺銇椼仸琛ㄧず銇欍倠 |
|
| IsNeutralSecondaryTerminalAvailable |
P_SINGLEVALUE
/
IfcBoolean
|
| Is Neutral Secondary Terminal Available | An indication of whether the neutral point of the secondary winding is available as a terminal (=TRUE) or not (= FALSE). |
| 涓х偣绗2銈裤兗銉熴儕銉亴銇傘倠銇嬨仼銇嗐亱 | 浜屾宸荤窔銇腑鎬х偣銇屻偪銉笺儫銉娿儷銇牬鍚堛伅锛=TRUE锛夈侀仌銇嗗牬鍚堛伅锛= FALSE锛夈仺銇椼仸琛ㄧず銇欍倠 |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page