| Name | Type | Description |
|---|
| Reference |
P_SINGLEVALUE
/
IfcIdentifier
* |
 | Bauteiltyp | Bezeichnung zur Zusammenfassung gleichartiger Bauteile zu einem Bauteiltyp (auch Konstruktionstyp genannt). Alternativ zum Namen des "Typobjekts", insbesondere wenn die Software keine Typen unterst眉tzt. |
 | Reference | Reference ID for this specified type in this project (e.g. type 'A-1'), Also referred to as "construction type". It should be provided as an alternative to the name of the "object type", if the software does not support object types. |
 | Reference | R茅f茅rence 脿 l'identifiant d'un type sp茅cifi茅 dans le contexte du projet (exemple : "type A1") pour d茅signer un "type de construction". Une alternative au nom d'un objet type lorsque les objets types ne sont pas g茅r茅s par le logiciel. |
 | 鍙傜収瑷樺彿 | 銇撱伄銉椼儹銈搞偋銈儓銇亰銇戙倠鍙傜収瑷樺彿(渚嬶細A-1)銆傚垎椤炪偝銉笺儔銇с伅銇亸鍐呴儴銇т娇鐢ㄣ仌銈屻倠銉椼儹銈搞偋銈儓銈裤偆銉椼仺銇椼仸浣跨敤銇曘倢銈嬨倐銇 |
 | 鍙傝冨彿 | 鑻ユ湭閲囩敤宸茬煡鐨勫垎绫荤郴缁燂紝鍒欒灞炴т负璇ラ」鐩腑璇ョ被鍨嬫瀯浠剁殑鍙傝冪紪鍙凤紙渚嬪锛岀被鍨婣-1锛夈 |
|
| Status |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ElementStatus* |
| Status | Status bzw. Phase des Bauteils insbesondere beim Bauen im Bestand. "Neu" (new) neues Bauteil als Erg盲nzung, "Bestand" (existing) bestehendes Bauteil, dass erhalten bleibt, "Abbruch" (demolish) Bauteil, das abgebrochen wird, "Tempor盲r" (temporary) Bauteil und andere Bauelemente, die vor眉bergehend eingebaut werden (wie Abst眉tzungen, etc.) |
| Status | Status of the element, predominately used in renovation or retrofitting projects. The status can be assigned to as "New" - element designed as new addition, "Existing" - element exists and remains, "Demolish" - element existed but is to be demolished, "Temporary" - element will exists only temporary (like a temporary support structure). |
| Statut | Statut de l'茅l茅ment, principalement utilis茅 dans les projets de r茅novation et de r茅habilitation. Le statut a pour valeur NOUVEAU pour un nouvel 茅l茅ment, EXISTANT pour un 茅l茅ment existant qui est conserv茅, DEMOLI pour un 茅l茅ment existant 脿 d茅molir et TEMPORAIRE pour un 茅l茅ment temporaire (comme une structure support provisoire). |
| 鐘舵厠 | 瑕佺礌锛堜富銇儶銉庛儥銉笺偡銉с兂銇俱仧銇敼淇儣銉偢銈с偗銉堛伀銇娿亜銇︼級銇姸鎱嬨 鐘舵厠銇併屾柊瑕(New)銆嶏紞鏂般仐銇忚拷鍔犮仌銈屻倠瑕佺礌銆傘屾棦瀛樸嶏紞瑕佺礌銇瓨鍦ㄣ仐銆併亱銇ゆ畫銈娿倐銇傘岀牬澹娿嶏紞瑕佺礌銇瓨鍦ㄣ仐銇熴亴銆佸粌妫勩仌銈屻倠銈傘伄銆傘屼竴鏅傜殑銆嶏紞涓鏅傜殑銇瓨鍦ㄣ仚銈嬭绱狅紙涓鏅傜殑銇偟銉濄兗銉堛仐銇︺亜銈嬫閫犮伄銈堛亞銇倐銇級銆 |
|
| NumberOfRows |
P_SINGLEVALUE
/
IfcInteger
|
| Number Of Rows | Number of tube rows in the tube bundle assembly. |
| 鍒楁暟 | 銉併儱銉笺儢銇泦鍚堛伄绲勭珛銇亰銇戙倠銉併儱銉笺儢鍒楁暟 |
|
| StaggeredRowSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Staggered Row Spacing | Staggered tube row spacing. |
| 浜掋亜閬曘亜銇垪闁撻殧 | 浜掋亜閬曘亜銇儊銉ャ兗銉栧垪闁撻殧 |
|
| InLineRowSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| In Line Row Spacing | In-line tube row spacing. |
| 銈ゃ兂銉┿偆銉冲垪闁撻殧 | 銈ゃ兂銉┿偆銉炽儊銉ャ兗銉栧垪闁撻殧 |
|
| NumberOfCircuits |
P_SINGLEVALUE
/
IfcInteger
|
| Number Of Circuits | Number of parallel fluid tube circuits. |
| 骞宠娴佸洖璺暟 | 骞宠娴併儊銉ャ兗銉栧洖璺暟 |
|
| FoulingFactor |
P_SINGLEVALUE
/
IfcThermalResistanceMeasure
|
| Fouling Factor | Fouling factor of the tubes in the tube bundle. |
| 姹氥倢淇傛暟 | 銉併儱銉笺儢鏉熴伄銉併儱銉笺儢姹氥倢淇傛暟 |
|
| ThermalConductivity |
P_SINGLEVALUE
/
IfcThermalConductivityMeasure
|
| Thermal Conductivity | The thermal conductivity of the tube. |
| 鐔变紳灏庣巼 | 銉併儱銉笺儢銇啽浼濆皫鐜 |
|
| Length |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Length | Length of the tubes in the tube bundle. |
| 闀枫仌 | 銉併儱銉笺儢鏉熴伄銉併儱銉笺儢闀枫仌 |
|
| Volume |
P_SINGLEVALUE
/
IfcVolumeMeasure
|
| Volume | Total volume of fluid in the tubes and their headers. |
| 娴侀噺 | 銉併儱銉笺儢銇ㄣ儤銉冦儉銉煎唴銇窂娴侀噺 |
|
| NominalDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Diameter | Nominal diameter or width of the tubes in the tube bundle. |
| 鍏О鐩村緞 | 銉併儱銉笺儢鏉熷唴銇儊銉ャ兗銉栧叕绉扮洿寰勫張銇箙 |
|
| OutsideDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Outside Diameter | Actual outside diameter of the tube in the tube bundle. |
| 澶栧緞 | 銉併儱銉笺儢鏉熷唴銇儊銉ャ兗銉栧疅澶栧緞 |
|
| InsideDiameter |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Inside Diameter | Actual inner diameter of the tube in the tube bundle. |
| 鍐呭緞 | 銉併儱銉笺儢鏉熷唴銇儊銉ャ兗銉栧疅鍐呭緞 |
|
| HorizontalSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Horizontal Spacing | Horizontal spacing between tubes in the tube bundle. |
| 姘村钩闁撻殧 | 銉併儱銉笺儢鏉熷唴銇儊銉ャ兗銉栭枔姘村钩闁撻殧 |
|
| VerticalSpacing |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Vertical Spacing | Vertical spacing between tubes in the tube bundle. |
| 鍨傜洿闁撻殧 | 銉併儱銉笺儢鏉熷唴銇儊銉ャ兗銉栭枔鍨傜洿闁撻殧 |
|
| HasTurbulator |
P_SINGLEVALUE
/
IfcBoolean
|
| Has Turbulator | TRUE if the tube has a turbulator, FALSE if it does not. |
| 銇嬨亸銇倱鍣ㄦ湁銈 | 銇嬨亸銇倱鍣ㄦ湁銈娿伄鏅 TRUE銆佺劇銇椼伄鏅 FALSE |
|
buildingSMART Data Dictionary
PSD-XML
Link to this page