Name | Type | Description |
NominalBodyLength |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Body Length | Nominal or quoted length measured along the x-axis in the local coordinate system or the radius (in the case of a circular shape in plan) of the chamber of the gully trap. |
| 鍛肩О韬綋闀 | 婧濋槻鑷紒銇崐寰勩亱灞鎵搴ф绯汇伄锛歌桓銇部銇c仸娓畾銇曘倢銇熷懠绉般倐銇椼亸銇⿳绠椼仌銈屻仧闀枫仌銆 |
|
NominalBodyWidth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Body Width | Nominal or quoted length measured along the y-axis in the local coordinate system of the chamber of the gully trap. |
| 鍛肩О韬綋骞 | 婧濋槻鑷紒銇崐寰勩亱灞鎵搴ф绯汇伄锛硅桓銇部銇c仸娓畾銇曘倢銇熷懠绉般倐銇椼亸銇⿳绠椼仌銈屻仧闀枫仌銆 |
|
NominalBodyDepth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Nominal Body Depth | Nominal or quoted length measured along the z-axis in the local coordinate system of the chamber of the gully trap. |
| 鍛肩О韬綋娣便仌 | 婧濋槻鑷紒銇崐寰勩亱灞鎵搴ф绯汇伄Z杌搞伀娌裤仯銇︽脯瀹氥仌銈屻仧鍛肩О銈傘仐銇忋伅绌嶇畻銇曘倢銇熼暦銇曘 |
|
GullyType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_GullyType |
| Gully Type | Identifies the predefined types of gully from which the type required may be set. |
| 闃茶嚟寮併伄绋 | 瑷疆銇欍倠浜堝畾銇簼銈掋亗銈夈亱銇樸倎瀹氱京銇с偪銈ゃ儣銈掔⒑瑾嶃仐銇俱仚銆 |
|
HasStrainer |
P_SINGLEVALUE
/
IfcBoolean
|
| Has Strainer | Indicates whether the gully trap has a strainer (= TRUE) or not (= FALSE). |
| 銈嶉亷瑁呯疆 | 婧濄伄闃茶嚟寮併亴銈嶉亷瑁呯疆銈掑倷銇堛仸銇勩倠銇嬨仼銇嗐亱銇寚绀恒 |
|
TrapType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_TrapType |
| Trap Type | Identifies the predefined types of trap from which the type required may be set. |
| 闃茶嚟寮併伄绋 | 銈汇儍銉堛仌銈屻倠浜堝畾銇槻鑷紒銇亗銈夈亱銇樸倎瀹氱京銇曘倢銇熴偪銈ゃ儣銈掔⒑瑾嶃仐銇俱仚銆 |
|
OutletConnectionSize |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Outlet Connection Size | Size of the outlet connection from the object. |
| 鎺掓皸鍙f帴缍氬彛銈点偆銈 | 瑕佺礌銇嬨倝銇帴缍氬彛銈点偆銈恒 |
|
BackInletPatternType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_BackInletPatternType |
| Back Inlet Pattern Type | Identifies the pattern of inlet connections to a gully trap.
A gulley trap may have 0,1,2,3 or 4 inlet connections and the pattern of their arrangement may vary. The enumeration makes the convention that an outlet is either vertical or is placed at the bottom (south side) of the gully trap (when viewed in plan). Position 1 is to the left (west), position 2 is to the top (north), position 3 is to the right (east) and position 4 is to the bottom (south). |
|
InletConnectionSize |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Inlet Connection Size | Size of the inlet connection(s), where used, of the inlet connections.
Note that all inlet connections are assumed to be the same size. |
| 鍚告皸鍙f帴缍氬彛銈点偆銈 | 鍚告皸鍙f帴缍氬彛銇偟銈ゃ偤銆
娉ㄦ剰锛氬悓銈点偆銈恒伄鍚告皸鎺ョ稓鍙c亴銇亜銈傘伄銇ㄣ仐銇俱仚銆 |
|
CoverLength |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Cover Length | The length measured along the x-axis in the local coordinate system or the radius (in the case of a circular shape in plan) of the cover of the gully trap. |
| 銈儛銉笺伄闀枫仌 | 灞鎵搴ф绯汇伄X杌搞伀娌裤亞銇嬨佸崐寰勶紙鍐嗙姸銇舰銇牬鍚堬級銇ф脯瀹氥仌銈屻仧婧濋槻鑷紒銈儛銉笺伄闀枫仌銆 |
|
CoverWidth |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Cover Width | The length measured along the y-axis in the local coordinate system of the cover of the gully trap. |
| 銈儛銉笺伄骞 | 灞鎵搴ф绯汇伄Y杌搞仹娓畾銇曘倢銇熸簼闃茶嚟寮併偒銉愩兗銇暦銇曘 |
|