| Name | Type | Description |
|---|
| Length |
Q_LENGTH
|
 | Length | Total length of the pile not taking into account any cut-out's or other processing features. |
|
| CrossSectionArea |
Q_AREA
|
| Cross Section Area | Total area of the cross section (or profile) of the pile. |
|
| OuterSurfaceArea |
Q_AREA
|
| Outer Surface Area | Total area of the extruded surfaces of the pile (not taking into account the end cap areas), normally generated as perimeter * length. |
|
| GrossSurfaceArea |
Q_AREA
|
| Gross Surface Area | Total area of the pile, normally generated as perimeter * length + 2 * cross section area. It is the sum of OuterSurfaceArea + (2 x CrossSectionArea) and shall only be given, if the OuterSurfaceArea and CrossSectionArea cannot be established separately. |
|
| GrossVolume |
Q_VOLUME
|
| Gross Volume | Total gross volume of the pile, not taking into account possible processing features (cut-out's, etc.) or openings and recesses. |
|
| NetVolume |
Q_VOLUME
|
| Net Volume | Total net volume of the pile, taking into account possible processing features (cut-out's, etc.) or openings and recesses. |
|
| GrossWeight |
Q_WEIGHT
|
| Gross Weight | Total gross weight of the pile without add-on parts, not taking into account possible processing features (cut-out's, etc.) or openings and recesses. |
|
| NetWeight |
Q_WEIGHT
|
| Net Weight | Total net weight of the pile without add-on parts, taking into account possible processing features (cut-out's, etc.) or openings and recesses. |
|
QTO-XML
Link to this page