IFC 4.3.0.0 (IFC4X3) final

8.10.3.15 IfcMaterialProfileWithOffsets

8.10.3.15.1 Semantic definition

IfcMaterialProfileWithOffsets is a specialization of IfcMaterialProfile with additional longitudinal offsets .

Relative positions of IfcMaterialProfileWithOffsets in the longitudinal direction of an element can be defined giving offsets at the start at the end, or at start and end. This shall not be used for relative positions of individual profiles in the plane of profile definition, which is given in composite profile definition itself. Also, care should be taken especially when used with IfcMaterialProfileSetUsageTapering for correct start and end offset assignment.

8.10.3.15.2 Entity inheritance

8.10.3.15.3 Attributes

# Attribute Type Description
IfcMaterialDefinition (3)
AssociatedTo SET [0:?] OF IfcRelAssociatesMaterial FOR RelatingMaterial

Use of the IfcMaterialDefinition subtypes within the material association of an element occurrence or element type. The association is established by the IfcRelAssociatesMaterial relationship.

HasExternalReferences SET [0:?] OF IfcExternalReferenceRelationship FOR RelatedResourceObjects

Reference to external references, e.g. library, classification, or document information, that are associated to the material.

HasProperties SET [0:?] OF IfcMaterialProperties FOR Material

Material properties assigned to instances of subtypes of IfcMaterialDefinition.

IfcMaterialProfile (7)
1 Name OPTIONAL IfcLabel

The name by which the material profile is known.

2 Description OPTIONAL IfcText

Definition of the material profile in descriptive terms.

3 Material OPTIONAL IfcMaterial

Optional reference to the material from which the profile is constructed.

4 Profile IfcProfileDef

Identification of the profile for which this material profile is associating material.

5 Priority OPTIONAL IfcInteger

The relative priority of the profile, expressed as normalised integer range [0..100]. Controls how profiles intersect in connections and corners of building elements: A profile from one element protrudes into (i.e. displaces) a profile from another element in a joint of these elements if the former element's profile has higher priority than the latter. The priority value for a material profile in an element has to be set and maintained by software applications in relation to the material profiles in connected elements.

6 Category OPTIONAL IfcLabel

Category of the material profile, e.g. the role it has in the profile set it belongs to. The list of keywords might be extended by model view definitions, however the following keywords shall apply in general: * 'LoadBearing' — the material profile having a load bearing function. * 'Insulation' — the material profile having an insolating function. * 'Finish' — the material profile being the finish.

ToMaterialProfileSet IfcMaterialProfileSet FOR MaterialProfiles

Material profile set in which this material profile is included.

Click to show 10 hidden inherited attributes Click to hide 10 inherited attributes
IfcMaterialProfileWithOffsets (1)
7 OffsetValues ARRAY [1:2] OF IfcLengthMeasure

The numerical value of profile offset, in the direction of the axis direction - always AXIS1 that is, the axis along the extrusion path. The OffsetValues[1] identifies the offset from the lower position along the axis direction (normally the start of the standard extrusion), the OffsetValues[2] identifies the offset from the upper position along the axis direction (normally the end of the standard extrusion).

Table 8.10.3.15.A

8.10.3.15.4 Formal representation

ENTITY IfcMaterialProfileWithOffsets
 SUBTYPE OF (IfcMaterialProfile);
	OffsetValues : ARRAY [1:2] OF IfcLengthMeasure;
END_ENTITY;

8.10.3.15.5 References

8.10.3.15.6 Changelog

  • New resource