IFC 4.3.0.0 (IFC4X3) final

8.10.4.14 Pset_MechanicalBeamInPlane

8.10.4.14.1 Semantic definition

Properties about Mechanical Beam in Plane.

8.10.4.14.2 Applicable entities

8.10.4.14.3 Properties

Name Property Type Data Type Description
YoungModulus IfcPropertySingleValue IfcModulusOfElasticityMeasure

A measure of the Young's modulus of elasticity of the material.

YoungModulusMin IfcPropertySingleValue IfcModulusOfElasticityMeasure

Elastic modulus, minimal value, 伪=0掳.

YoungModulusPerp IfcPropertySingleValue IfcModulusOfElasticityMeasure

Elastic modulus, mean value, 伪=90掳.

YoungModulusPerpMin IfcPropertySingleValue IfcModulusOfElasticityMeasure

Elastic modulus, minimal value, 伪=90掳.

ShearModulus IfcPropertySingleValue IfcModulusOfElasticityMeasure

A measure of the shear modulus of elasticity of the material.

ShearModulusMin IfcPropertySingleValue IfcModulusOfElasticityMeasure

Shear modulus, minimal value.

BendingStrength IfcPropertySingleValue IfcPressureMeasure

Defining values: 伪; defined values: bending strength.

TensileStrength IfcPropertySingleValue IfcPressureMeasure

Indicates the ability to withstand breakage apart under applied force.

TensileStrengthPerp IfcPropertySingleValue IfcPressureMeasure

Tensile strength, 伪=90掳.

CompStrength IfcPropertySingleValue IfcPressureMeasure

Compressive strength, 伪=0掳.

CompStrengthPerp IfcPropertySingleValue IfcPressureMeasure

Compressive strength, 伪=90掳.

RaisedCompStrengthPerp IfcPropertySingleValue IfcPressureMeasure

Alternative value for compressive strength, 伪=90掳, which may be used under material and code dependent conditions (e.g. if deformation is tolerable, or far from ends of the member); conditions should be stated in SELF\IfcProperty.Description.

ShearStrength IfcPropertySingleValue IfcPressureMeasure

Defining values: 伪; defined values: shear strength.

TorsionalStrength IfcPropertySingleValue IfcPressureMeasure

Shear strength in torsion.

ReferenceDepth IfcPropertySingleValue IfcPositiveLengthMeasure

Depth in bending for which the mechanical properties are valid; provided as a means to check the integrity of material assignment.

InstabilityFactors IfcPropertyTableValue IfcPositiveRatioMeasure/IfcPositiveRatioMeasure

Defining values: slenderness ratios; defined values: either factors or divisors of the strength, depending on the design method (if <1: factors, if >1: divisors).

Table 8.10.4.14.A

8.10.4.14.4 Changelog

  • New resource