IFC 4.3.0.0 (IFC4X3) final

7.11.4.6 Pset_PrecastSlab

7.11.4.6.1 Semantic definition

Layout and component information defining how prestressed slab components are laid out in a precast slab assembly. The values are global defaults for the slab as a whole, but can be overridden by local placements of the individual com

7.11.4.6.2 Applicable entities

7.11.4.6.3 Properties

Name Property Type Data Type Description
TypeDesignation IfcPropertySingleValue IfcLabel

Type designator for the element. The content depends on local standards. Eg. 'Bull nose', 'Half batter', 'Dropper', 'Chamfer' etc

ToppingType IfcPropertySingleValue IfcLabel

Defines if a topping is applied and what kind. Values are 鈥淔ull topping鈥, 鈥淧erimeter Wash鈥, 鈥淣one鈥

EdgeDistanceToFirstAxis IfcPropertySingleValue IfcPositiveLengthMeasure

The distance from the left (鈥榃est鈥) edge of the slab (in the direction of span of the components) to the axis of the first component.

DistanceBetweenComponentAxes IfcPropertySingleValue IfcPositiveLengthMeasure

The distance between the axes of the components, measured along the 鈥楽outh鈥 edge of the slab.

AngleToFirstAxis IfcPropertySingleValue IfcPlaneAngleMeasure

The angle of rotation of the axis of the first component relative to the 鈥榃est鈥 edge of the slab.

AngleBetweenComponentAxes IfcPropertySingleValue IfcPlaneAngleMeasure

The angle between the axes of each pair of components.

NominalThickness IfcPropertySingleValue IfcNonNegativeLengthMeasure

The nominal thickness of the object. The size information is provided in addition to the shape representation and the geometric parameters used within. In case of inconsistency between the geometric parameters and the size properties, provided in the attached property set, the geometric parameters take precedence.

NominalToppingThickness IfcPropertySingleValue IfcPositiveLengthMeasure

The nominal thickness of the topping.

Table 7.11.4.6.A

7.11.4.6.4 Changelog

  • New resource