Name | Type | Description |
ToiletType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ToiletType |
| Toilet Type | Enumeration that defines the types of toilet (water closet) arrangements that may be specified where:-
BedPanWasher: Enclosed soil appliance in which bedpans and urinal bottles are emptied and cleansed.
Chemical: Portable receptacle or soil appliance that receives and retains excrement in either an integral or a separate container, in which it is chemically treated and from which it has to be emptied periodically.
CloseCoupled: Toilet suite in which a flushing cistern is connected directly to the water closet pan.
LooseCoupled: Toilet arrangement in which a flushing cistern is connected to the water closet pan through a flushing pipe.
SlopHopper: Hopper shaped soil appliance with a flushing rim and outlet similar to those of a toilet pan, into which human excrement is emptied for disposal. |
| 銉堛偆銉ó椤 | 銉堛偆銉厤缃伅涓嬭銇垪鎸欍仌銈屻仧浠曟銇ㄣ仾銈娿伨銇欍
渚垮櫒娲楁祫姗燂細渚垮櫒銇ㄥ皬渚垮櫒銇岀┖銇仌銈屾礂娴勩仌銈屻倠鍛ㄥ洸銇屽洸銇俱倢銇熼浕姘楁鍣ㄣ
銈便儫銈儷锛氬垾銆呫伄瀹瑰櫒銇ф帓娉勭墿銈掑彈銇戙仸銆佷繚鎸併仐銆佸寲瀛︾殑銇壉銈忋倢銈嬨佸畾鏈熺殑銇┖銇仌銈屻倠鎼哄腐鐢ㄣ伄瀹瑰櫒銇俱仧銇湡姗熷櫒銆
锝硷浇锞锝帮緷鐩寸祼鍨嬶細锝硷浇锞锝帮緷銇屻亴渚垮櫒銇洿鎺ュ瘑鐫銇椼仸瑷疆銇曘倢銇熴偪銈ゃ儣
锝硷浇锞锝帮緷鍒嗛洟鍨嬶細锝硷浇锞锝帮緷銇岋緤锞燂讲锞岋緹銈掍粙銇椼仸渚垮櫒銇仱銇亴銇c仸銇勩倠銈裤偆銉
姹氱墿娴併仐锛氥儧銉冦儜銉笺伅鍦熷鍣ㄥ叿銇儑銈躲偆銇曘倢銇︺亰銈娿佹睔鐗┿亴娴併仌銈岀┖銇仾銈娿伨銇欍 |
|
ToiletPanType |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_ToiletPanType |
| Toilet Pan Type | The property enumeration Pset_ToiletPanTypeEnum defines the types of toilet pan that may be specified within the property set Pset_Toilet:-
Siphonic: Toilet pan in which excrement is removed by siphonage induced by the flushing water.
Squat: Toilet pan with an elongated bowl installed with its top edge at or near floor level, so that the user has to squat.
WashDown: Toilet pan in which excrement is removed by the momentum of the flushing water.
WashOut: A washdown toilet pan in which excrement falls first into a shallow water filled bowl. |
| 渚垮櫒銈裤偆銉 | Pset_SanitaryMountingEnum銇笅瑷樸伀鍒楁寵銇曘倢銇熶究鍣ㄣ偪銈ゃ儣銇ㄣ仐銇﹀畾缇┿仌銈屻伨銇欍
銈点偆銉涖兂寮忥細娴佹按銈掑惈銈銈点偆銉涖兂銇倛銈婃睔鐗┿亴寤冩銇曘倢銈嬩究鍣
鍜屽紡锛氫究鍣ㄣ亴搴婇潰銇嬫返銇珮銇曘仺鍚屻仒銇厤缃仌銈屻仧渚垮櫒銆備娇鐢ㄨ呫伅銇椼們銇屻伨銇亼銈屻伆銇倝銇亜銆
銈︺偐銉冦偡銉ャ儉銈︺兂寮忥細鍕€亜銈堛亸娲椼亜娴併仚銇撱仺銇倛銈婁究鍣ㄣ倰銇嶃倢銇勩伀銇椼伨銇
娲楁祫寮忎究鍣細銇俱仛姹氱墿銇岃惤銇°仢銇緦銆佷究鍣ㄣ伀姘淬亴娴併倢銇俱仚 |
|
PanMounting |
P_ENUMERATEDVALUE
/
IfcLabel
/
PEnum_SanitaryMounting |
| Pan Mounting | The property enumeration Pset_SanitaryMountingEnum defines the forms of mounting or fixing of the sanitary terminal that may be specified within property sets used to define sanitary terminals (WC鈥檚, basins, sinks, etc.) where:-
BackToWall: A pedestal mounted sanitary terminal that fits flush to the wall at the rear to cover its service connections.
Pedestal: A floor mounted sanitary terminal that has an integral base.
CounterTop: A sanitary terminal that is installed into a horizontal surface that is installed into a horizontal surface. Note: When applied to a wash hand basin, the term more normally used is 鈥榲anity鈥. See also Wash Hand Basin Type specification.
WallHung: A sanitary terminal cantilevered clear of the floor. |
| 鍙栦粯鏂规硶 | Pset_SanitaryMountingEnum銇浐瀹氥仌銈屻仧琛涚敓鍣ㄥ叿銇帴缍氱偣锛堛儓銈ゃ儸銈勬礂闈㈠櫒銆併偡銉炽偗銇仼锛夈伀鍙栥倞浠樸亼銈夈倢銇俱仚銆
銉诲簥缃亶澹佹帓鍑猴細鑳岄潰銇銇帴缍氬彛銈掑悎銈忋仜銈嬨亾銇ㄣ
銉诲彴锛氬簥缃亶銇鐢熷櫒鍏枫伀銇熀绀庛亴銇傘倠銇撱仺銆
銉汇偒銈︺兂銈裤兗锛氳鐢熷櫒鍏枫伄琛ㄥ堡銇屾按骞炽伀瑷疆銇曘倢銇︺亜銈嬨亾銇ㄣ傗绘墜娲椼亜鍙般仺銇椼仸瑷疆銇曘倢銇熷牬鍚堛屽寲绮у彴銆嶃仺銇椼仸鎵便亞銇撱仺銆傘伨銇熴佹礂闈㈠彴绋銇鏍艰〃銈掑弬鐓с伄銇撱仺銆
銉诲鎺涖亼鍨嬶細琛涚敓鍣ㄥ叿銇墖鍋村浐瀹氥亴銇曘倢搴娿亱銈夐洟銈屻仸銇勩倠銇撱仺銆 |
|
SpilloverLevel |
P_SINGLEVALUE
/
IfcPositiveLengthMeasure
|
| Spillover Level | The level at which water spills out of the terminal. |
| 姘翠綅 | 缍欐墜銇嬨倝銇按浣嶃 |
|